Flexible on-Load Regulation 6.3kv Dry Transformer

• Customization: Available
• Application: Power
• Phase: Three
• Model NO.: Dry Type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Multi-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: Ring
• Brand: Toonice
• Linking Group: Dyn11 or Yyno
• Frequency: 50Hz/60Hz
• Customization: Acceptable
• Delivery Time: Depend on The Quantity
• Transport Package: Wooden Case
• Specification: Depends On The Model
• Trademark: TOONICE
• Origin: China
• HS Code: 8504349000
• Production Capacity: 100 Pieces/Week

Product Description

    It is safe, non-pollute,and flame proof, which can be installed directly on the load center with the merits of free maintenance, easy installation, low combined operationcost, low loss and excellent humidity resistance. The transformer can be operated normally under100% humidity and put into motion without dry in advance when out of use It shares the properties of low partial electricity local discharge, low noise and large heat dispel capability, it can be operated with the rated load of 150% under the forced air cooling conditions. With perfect temperature protectcontrol system to ensure safty operation of the transformer 'Referring to the operation research of 10 thousand transformers have been putto use, their reliability norm have reached advanced international standard.
   
Iron core:
    The iron core is made of high quality cold silicon steel sheet with 45 ºC sloping seam, its barrel is strapped with insulated tape, and it is sealed with resin to be safeguarded against corruption and moisture, the clamping parts andfastener are corruption-proof followedby superficial treatment.
    In addition, huguang have exploited multi-stepping laminated core technology, the core is self-stacked by shearing line, the iron molding adopts non-lamiated upper yoke to reduce the no-load loss, no-load current and iron noise.

Lv fooled winding:
    For LV and heavy current winding, its short-current stress is very large and low voltage tum is small at the same time, the heavierthe low voltage current is, the more prominent the problem of nonstabilityon ampere-tur which adopting wire-wound will be, and moreover, the heat dispersion should be considered, but the above problem can be better solved by adopting foi I winding, at first, there has been no axial turns and axial winding helix angle for foil products, the ampereturn of high/low voltage winding is equal and the axial shortcurrent stress is small. Secondly, due to the laminated insulation, it is easy to set up multilevel air passage as per its technology, so is the problem of heat diversion. Our foil winding auto wound on the auto foil winding machine, which supplied by France stollberg Corporation,adoptsprotective internal welding with argon, with the excellent properties of high accuracy, low welding resistance and non extemal welding process. The interlayer of winding insulate DMD, the extreme end is sealed and solidified by resin.

Hv casted winding:
    Coil adopt class F copper wire as the windings' conductor, glass fibre and epoxy resin composite as insulation, whose coefficient of expansion is close to the copper conductor with the merits of excellent shock resistance, high temperature adaptive faculty and nice shattering resistance.The compositions of glass fibre and epoxy resin have the best properties ofhigh fire resistance, which the windings, there be armed air passage for transformer of large capacity, Then dry it invacuum.The whole casting and olidifying process is performed according to the process curve of casting control terminal, which transferred through computer network by process department, every process can be monitored momentarily and adjusted for the various surroundings. The precise process ensures free bubble and free hole of winding.

Temperature control system:
    It applies crosscurrent top-blow cooling fan which has charact-eristics of low noise, high wind pressure and good looking, eat. The fan improves the overload capability of the transformer, the intelligent thermal controller improves the reliability of the operation of the tranformer.

Protect shield cover:
    The shell makes further protection for transformer. For users option, the grade of protection has IP20,IP23, ect. and the material has sort of cold-rolled steel plates and stdainless steel plates, ect.
The low-voltage outgoing line can adopt the method of standard bus bar group outgoing line, outgoing on the transverse side and upper part as well as the very method that designed by the users.



 

Working Environment:

Highest air temperature +40ºC,

Lowest air temperature -5ºC

Hottest monthly average temperature +30ºC

Hottest yearly average temperature +20ºC

The height above the sea level is below 1000m;

The power supply voltage's cave is similar to sine wave

Installation without evidence filth.

Service indoor.

 

 

Enforce The Standard:

GB/T  10228-2008

GB   1094.11-2007

 

Product model description:

SC   Z - (B) - 10 - XXXX   **
1     2     3      4     5          6

 

1.Triple phase solid molding (epoxy casting)

2.On-load tap changing

3.LV foil winding

4.Functional level code

5.Rated capacity(kVA)

6.Rated HV(filling with the rated value)

 

Technical Parameters:

 

SC(ZB)10 Series 10kv Dry Transformer

Rated Capacity(kVA)	No-load loss(W)	Load loss (75ºC)(W)	(dB)Sound'sleve	Weight(kg)	(mm)Dimension				LV Termina	No-load Cument (%)	Impedance Voltage (%)
					a	b	C	d1xd2
30	190	620	38	290	600	400	650	350×350	25×3	1.9
50	270	880	40	360	600	400	705	350×350	25×3	1.4
80	370	1210	42	590	730	500	740	450×450	25×3	1.0
100	400	1390	44	640	760	500	775	450×450	30×3	1.0
125	470	1630	44	670	760	500	840	450×450	30×3	0.9
160	540	1870	46	870	1120	750	1015	550×660	40×3	0.8	4.0
200	620	2220	46	1040	1130	750	1040	550×660	40×3	0.8
250	720	2420	46	1220	1170	750	1070	550×660	40×3	0.8
315	880	3050	47	1470	1260	750	1080	660×660	50×4	0.7
400	980	3500	47	1760	1290	750	1120	660×660	50×5	0.7
500	1160	4290	49	2050	1340	750	1220	660×660	60×5	0.6
630	1340	5240	49	2450	1510	750	1170	660×660	60×6	0.5
800	1520	6110	49	2360	1560	750	1230	660×660	80×6	0.4
1000	1770	7140	51	2730	1610	900	1330	820×820	80×8	0.4
1250	2090	8510	51	3270	1690	900	1440	820×820	100×8	0.3	6.0
1600	2450	10290	51	3840	1730	900	1560	820×820	100×10	0.3
2000	3050	12690	51	4920	1860	1200	1640	1070×1070	100×12	0.25
2500	3600	15080	51	5780	2000	1200	1720	1070×1070	120×12	0.25
1600	2450	11370	51	3950	1800	900	1480	820×820	100×10	0.3
2000	3050	14020	53	5080	1900	1200	1540	1070×1070	100×12	0.25	8.0
2500	3600	16590	53	5850	2010	1200	1650	1070×1070	120×12	0.25

   

*The above table data does not represent the parameter configuration of all models, please contact us for more information.

 

Detailed Photos

 

 

 

 

 

 

 

 

      Wenzhou Naisite Electric Co., Ltd is a technology oriented transmission and distribution equipment manufacturing enterprises, since its establishment in 2011, focus on transmission and distribution equipment technology progress, advocating technological innovation, introduce new energy prefabricated, a secondary fusion ring cage, environmental protection cabinet,Transformers, cable branch box, box type substation such as intelligent high and low voltage transmission and distribution equipment. Applicable to electric power, railway, petrochemical, subway, municipal construction, steel, coal and other industries. The company's products have achieved a number of technological breakthroughs in environmental protection, miniaturization, intelligence, maintenance free and other aspects. The headquarters of Wenzhou Naisi Electric Co., Ltd is located in the core area of Wenzhou Yueqing Economic Development Zone, "the capital of Electrical appliances in China". Has an excellent domestic intelligent distribution network products assembly line.

      The company has a vacuum box helium leak detection system, local discharge test laboratory and other advanced inspection and test equipment system. With the basic experimental facilities and research environment needed for advanced technology development and scientific research, the products are tested according to the international IEC standards. The enterprise has passed the IS09001 quality system certification, IS014001 environmental system certification and OHSAS18001 occupational health and safety management system certification, the products have been obtained the CNAS national accreditation laboratory certification report.

 

 

 

Q: Are you a trading company or manufacturer ?

A: We are a professional factory with 10 years experience in the field of High and Low voltage switchgears,Substation,transformers,cable distribution box and various electrical equipment, such as vacuum circuit breaker , load break switch etc.Our factory is the excellent supplier of State Grid Corporation of China .

 

Q: Do you accept customized serveice ?

A: We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provice a satisfied project according to your drawing and parameters .

 

Q: What is your MOQ?

A: Our MOQ is 1 piece .

 

Q:How long is your delivery lead time ?

A: It depends on your product requirement and quantity . Generally , 5~10 working days is available .

 

Q: How do you solve quality problems?

A: Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make a satisfied soluton within 2 days.

 

Q: What is your payment terms ?

A: 30%T/T in advance,70% before shipment . West union , L/C are also acceptable .